JUJO CHEMICAL CO.,LTD.

SEARCH

  • Product Detail

Ink

RC CDV-S Series

RAYCURE
UV cure

Properties

Excellent in hardness & scratch resistance. Fast curing.

Excellent in hardness & scratch resistance. Fast curing.
Printing on UV clear-coated CD,CD-ROM.

INTRODUCTION

RC CDV-S SERIES is designed for label-printing on UV protective coating of compact discs. Ink film is hard. Adhesion and curing are good.

APPLICATIONS

Print on UV protective clear coating of CDs.

CHARACTERISTICS

  • Excellent high-speed printability.
  • Good resistance to chemicals such as acid or alkali.
  • Ink film is hard and resistant to abrasion.
  • Skin irritation(P.I.I.) is low and it is easy to handle.

HOW TO USE

  1. Ink is supplied in ready-to-use condition. Add CLEAR to adjust density. Add REDUCER(reactive type) to adjust viscosity.
  2. CDV-S SERIES is not compatible with other series of inks.
  3. Standard curing conditions(Conditions depend on colors.):
    Metal halide lamp 120 W/cm, Integral light : approx. 400 mJ/cm²
  4. Mesh : 300-420 meshes

COLOR RANGE

01 WHITE, 07 OPAQUE WHITE, UP WHITE(under coating for offset printing), 02 YELLOW, 03 LEMON YELLOW, 28 ORANGE, 05 BRIGHT RED, 08 RED, 17 GERANIUM, 16 PINK, 25 VIOLET, 35 SKY BLUE, 46 BLUE, 45 DEEP BLUE, 75 GREEN, 87 MARINE BLUE, 90 BLACK, 00 CLEAR, HFT MATT CLEAR, HALFTONE LEMON YELLOW, HALFTONE MAGENTA, HALFTONE CYAN, HALFTONE BLACK

PRECAUTIONS

  1. SP WHITE is especially opaque and recommendable for under coating for offset prints.
  2. Although skin irritation is low, it is advised to avoid skin contact with the ink. In case of contact with skin, wash immediately with soap and water.
  3. Store the ink in a cool and dark place. Ink gels or increases its viscosity when left in hot place (>30°C)(>86°F).
  4. Stir well before use.
  5. Please refer to MSDS before use.
  6. Be sure to do trial print before commercial run to confirm that the product fits the purposes.

PHYSICAL PROPERTIES

  • Substrate : UV clear coating of compact disc
  • Meshes : Polyester 350 meshes
  • Curing : One metal halide lamp 120 W/cm, Integral light : 400 mJ/cm²
TEST ITEMS TEST METHODS RESULTS
Adhesion Cross-hatch, tape-peeling test 100/100 Passed
Hardness Pencil hardness 2H
Over-printability Adhesion test with 3-time-print Passed
Alcohol resistance 100 rubbing test with load of 500 grams
with 99.5% ethanol.
Passed
Water-proofness Immersion for 24 hours Passed
Acid resistance Dropping of 1N/H2SO4 for 4 hours Passed
Alkali resistance Dropping of 1N/NaOH for 4 hours Gloss slightly spoiled
Abrasion resistance 500 rubbing with 500 grams/cm²
with abrasion tester
Passed
Weathering resistance 500 hours with Sunshine-Weather Meter Passed
  • Weathering resistance depends on the color. Please refer to lightfastness chart before use.
  • Information given here is gained from our laboratory testing, and no firm guarantee is implied.

Applications Usage

Printing on UV clear-coated CD,CD-ROM.

MENU