Ink
8300 Series EMA
Properties
Low price. Excellent adhesion.
Good flexibility. Alcohol resistance.
INTRODUCTIONS
8300 SERIES EMA INK is evaporative drying type of ink specially designed for industrial meters and fascias. 8300 SERIES satisfies the required properties with its low price, which means high cost performance of this series.
APPLICATIONS
Fascias of polycarbonate and acryl, industrial meters, name plates. Printing on ABS, rigid vinyl resin.
CHARACTERISTICS
- The possibility of the crack on the substrate is low. Excellent adhesion.
- Excellent printability. The possibility of pin holes and crawling is low.
- Excellent flexibility. Suitable for post-processing such as punching.
- Excellent resistance to oil, alcohol and chemicals.
HOW TO USE
Dilute the ink with PC THINNER(standard drying, slow drying, retarder). SPECIAL PC RETARDER is recommendable to print fine patterns. If other thinner is used, cracks may appear on the substrate.
DRYING
Tack free time : Diluted with 20% thinner to print on polycarbonate. Dried at room temperature.
- PC THINNER, STANDARD DRYING : Approx. 5 -10 minutes
- PC THINNER, SLOW DRYING : Approx.20 minutes
- PC RETARDER : Approx.25 minutes
- SPECIAL PC RETARDER : Approx.35 minutes
When 8300 series is used for fascias and industrial meters, heat drying at higher than 70°C(158°F) is recommended to avoid the out-gas trouble.
STENCIL & WASHING UP
Use photo-stencil. Use our VINYL CLEANING THINNER for washing up.
COLORS & TYPE OF PACKING
Standard 15 colors, EXO(extra opaque) 5 colors, transparent 4 colors. 1-kg-can.
PRECAUTIONS
- Cracks may happen on polycarbonate molds and some kinds of sheets. If cracks happen, anneal the substrate, or use SSP THINNER STANDARD DRYING(special). The situation may be improved.
- Please refer to MSDS before use.
- Be sure to do trial print before commercial run to confirm that the product fits the purposes.
PHYSICAL PROPERTIES
| Test items | Test methods | Results |
|---|---|---|
| Adhesion | Cross-hatch, tape-peeling test | 100/100 Passed |
| Pencil hardness | JIS K5400.8.4 pencil hardness (load:1 kg) | Peeling : 5H Scratch : F |
| Impact resistance | JIS K5400 8.3.2.DuPont Impact Tester 1/2 inch, 500 grams, 50 cm |
No cracks No peeling |
| Bending resistance | JIS K5400 8.1 bending test, diameter: 6mm, 90 degrees |
No cracks No peeling |
| Punching resistance | Cutting off by punching | No cracks No peeling |
| Heat resistance | 100°C(212°F), 24 hours | Passed |
| Humidity resistance | 95%RH, 60°C(140°F), 96 hrs | Passed |
| Abrasion resistance | No.3 cotton cloth, 500g, 5.5m/s, 30 times | Passed |
| Oil resistance | Immersion in 2 kinds of oil for cars SAE75W, 1 hour | Passed |
| Alcohol resistance | 100 rubs with ethanol (1st grade of testing chemical) | Passed |
| Water-proofness | Immersion in water(50°C)(122°F), 24 hours | Passed |
| Heat-coldness cycle resistance | -30°C(-22°F) 2.5hrs –> room temp. 0.5hrs –> 100°C(212°F) 2.5hrs –> room temp. 0.8hrs –> 4 cycles of above condition |
Passed |
| Weathe ringresistance | Sunshine Weather-O-Meter, 300 hours | Passed |
- The above informations were gained by our laboratory testing and no guarantee is implied.
- Test was performed after ink printed on polycarbonate completely dried.
- Lightfastness varies depending on color. Please refer to lightfastness chart The lightfastness of matched colors, especially smoke colors and pale colors, is inferior to that of standard colors.
Applications Usage
Polycarbonate, Rigid PVC.
Especially for industrial applications.
INK FINDER
Enter a keyword that helps you to find the products which meet your requirements for function, application and substrate.
"Advanced search" makes it possible to find the search conditions from drop-down list.
