Ink
2500 SeriesMIG-N(SD)
Properties
Excellent adhesion. Chemical resistance.
Boiling & alcohol resistance.
INTRODUCTIONS
2500 SERIES MIG-N(SD)INK is one-pack type of ink designed for metal and glass. 2500 SERIES MIG-N(SD)INK is slow drying version of conventional 2500 SERIES MIG-N INK. Its adhesion to the materials is superb and the physical properties and weathering resistance are also excellent.
APPLICATIONS
Unprimed-metal, primed metal, glass, ceramics, thermo-setting resin products.
CHARACTERISTICS
- Excellent adhesion and glossy finish.
- Ink film is tough. Superior physical properties and weathering resistance can be obtained.
- Ink cures at relatively low temperature(150°C)(302°F).
- The possibility of clogging is low due to its slow drying.
HOW TO USE
- It is easy to handle compared with two-pack type of ink which has pot life.
- Dilute the ink with TETRON THINNER or PC THINNER.
- Add thinner by 10-20% and stir well before printing.
DRYING
Tack-free-level of drying can be obtained with hot wind drying at 50°C(122°F) for 7 minutes plus 100°C(212°F) for 2 minutes. Dry each color under these conditions before printing other color on top of it. Baking should be done only once after printing the last color. Baking conditions : 150°C(302°F) x >30 minutes.
STENCIL AND WASHING UP
Use photo-stencil. Our VINYL CLEANING THINNER is recommended for washing up.
COLORS & TYPE OF PACKING
Standard 13 colors, Halftone 5 colors. 1-kg-can
PRECAUTIONS
- 2500 SERIES MIG-N(SD)INK reacts to heat. Store the ink at low temperature (<40°C)(<104°F).
- This ink does not cure unless it is heated at the higher temperature than 150°C(302°F).
- Add JA-1000 by 0.5-1% when printed on glass. Adhesion and physical properties such as solvent resistance are much improved. Pot life of the mixture is 12 hours at 20°C(68°F).
- Please refer to MSDS before use.
- MIG-N is manufactured after receiving order. There is no stock.
- Be sure to do trial print before commercial run to confirm that the product fits the purposes.
PHYSICAL PROPERTIES
| Test items | Test methods | Results |
|---|---|---|
| Adhesion | Cross-hatch, tape-peeling test | 100/100 Passed |
| Hardness | JIS K5400.8.4 pencil hardness | 3H-4H |
| Impact resistance | JIS K5400 8.3.2 Du Pont Impact Tester 1/2 inch, 500 grams, 20 cm |
No cracks, No peeling |
| Solvent resistance | 1. Lacquer thinner – rubbing (MIBK/Ethylacetate/Toluen=1:1:1) |
>100 times |
| 2. Xylene – rubbing | >100 times | |
| 3. Methanol – rubbing | >200 times | |
| 4. Immersion in gasoline, 1 hour | Passed | |
| Abrasion resistance | 1000 times with cotton cloth | Passed |
| Heat resistance | JIS K5400 8.13 180°C(356°F), 30 minutes | Passed |
| Coldness resistance | -30°C(-22°F), 48 hours | Passed |
| Water-proofness | JIS K5400 8.19. Immersion in water(40°C)(104°F), 14 days | Passed |
| Humidity resistance | >95%, 50°C(122°F), 14 days | Passed |
| Boiling water resistance | Immersion, 1 hour | Passed |
| Detergent resistance | Immersion in 5% detergent, 24 hours | Passed |
| Oil resistance | Immersion in motor oil, 24 hours | Passed |
| Cleaner resistance | Immersion in cleaner, 6 hours | Passed |
| Alkali resistance | Immersion in 5%NaOH, 6 hours | Passed |
| Acid resistance | Immersion in 5% H2SO4 , 6 hours | Passed |
| Salt-water resistance | Immersion in 5%salt water, 14 days | Passed |
| Weathering resistance | Sunshine Weather Meter, 1000hours | Passed |
- Immersion test was performed at room temperature.
- The different results may be obtained depending on substrates.
- Weathering resistance depends on the color. Please refer to lightfastness chart.
- The above information were gained by our laboratory testing and no guarantee is implied
Applications Usage
Excellent adhesion. Chemical resistance.
Boiling & alcohol resistance.
INK FINDER
Enter a keyword that helps you to find the products which meet your requirements for function, application and substrate.
"Advanced search" makes it possible to find the search conditions from drop-down list.
