Aug,2009

RC OP 43 SERIES (OVER COAT CLEAR)

PREFACE

RC OP 43 SERIES OVER COAT CLEAR(O.C.C)is designed for over-coating on offset and gravure prints.
HG O.C.C has excellent curing and adhesion. Low-cost version, NOP O.C.C and LOP O.C.C are also available.

APPLICATIONS

Paper, over coating on offset prints and gravure prints, laminated materials, laminated matt PP materials

CHARACTERISTICS

• Suitable for high-speed printing like cylinder press.
• Fast cure. Blocking resistance is good when the printed matters are stacked.
• Adhesion to offset prints and matt PP materials is good.
• Cured ink film has good levelling and abrasion resistance as well as high gloss.
• No harmful materials such as heavy metal and N-Vinyl Pyrrolidone are contained.

HOW TO USE

1. Ink is supplied in ready-to-use condition. Stir well before use.
2. Add 43-00 REDUCER up to 10% if it is necessary to lower viscosity.
3. Standard curing conditions :
   Mesh count : 350
   Sol thickness(microns) : 10
   Conveyor speed(m/min) : 20
   Integral light(mJ/cm²) : 120
   Ink film thickness(microns) : 10-12

• Lamp power : One metal halide lamp 120W/cm
• Distance from focus : 10 cm
• Cooling : Water cooling or air coolin

COVERAGE

• 70-90 m²/kg (350 meshes/inch, sol thickness: 10 microns)

TYPE OF PACKING

1-kg-plastic container
4-kg-plastic container

AVAILABLE TYPES

HG O.C.C

Excellent gloss and levelling , Superior adhesion

NOP O.C.C

Good curing and blocking resistance. Low price.
(This item is manufactured after receipt of the order.)

LOP O.C.C New !

Good curing and blocking resistance. Lower price than NOP O.C.C.
(This item is manufactured after receipt of the order)

PROPERTIES

	HG	NOP	LOP
Curing	excellent	excellent	excellent
Adhesion	excellent	good	fair
Flexibility	good	good	good
Blocking resistance	good	excellent	good
High-speed printability	good	good	good
Others	good adhesion	low price	lower price than NOP

Information given here is gained from our laboratory testing and for your reference only.

PRECAUTIONS

1. Blocking resistance is effected by the gloss of the paper on which the ink is printed.
   Blocking may happen to thickly-printed ink when the substrate is glossy paper.
2. Please refer to the literature, "UV INK" for general precautions.
3. Please refer to MSDS before use.
4. Be sure to do trial print before commercial run to confirm that the product fits the purposes.

PHYSICAL PROPERTIES

• Substrate: Coated paper
• Meshes: Polyester 350 meshes/inch, Sol thickness: 10 microns
• Ink printed: HG O.C.C.
• Thickness of ink film: 10 microns
• Curing: One metal halide lamp 120W/cm,
  Conveyor speed - 20 m/min. (Integral light : 120 mJ/cm²)

TEST ITEMS	TEST METHODS	RESULTS of HG
Adhesion	Cross-hatch, tape-peeling test	100/100
Hardness	Pencil hardness (JIS K-5400 8.4)	H-2H
Bending resistance	Bending test (JIS K-5400 8.1)	Passed
Abrasion resistance	Abrasion test with 500-gram-load	10000 times Passed

Information given here is gained from our laboratory testing, and no firm guarantee is implied.