JUJO CHEMICAL CO.,LTD.

SEARCH

  • Product Detail

Ink

F-Series

2-component
Pad printing

Properties

Good adhesion & scratch resistance.

Good adhesion & scratch resistance.
Glass, Ceramics, Metal, ABS, PPS, Thermosetting resin.

TYPE OF INK

2-component type. Semi-gloss finish.

APPLICATIONS

  • ABS, thermosetting resin(phenol, epoxy), primed metal, organic surface of engineering plastics(nylon, PPS, liquid crystal polymer).
  • Inorganic substrate such as glass, ceramics, aluminum, steel, stainless, copper, etc.

CHARACTERISTICS

  • Excellent adhesion and tough ink film.
  • Thought weathering resistance of F SERIES is inferior to D SERIES. F SERIES adheres to various materials better than D SERIES.
    * The usage of F SERIES depends of the substrate.

HOW TO USE 1

ABS, thermosetting resin(phenol, epoxy), primed metal, organic surface of engineering plastics(nylon, PPS, liquid crystal polymer). When drying at low temperature is required in the printing on inorganic substrate such as primed metal, aluminum, steel, stainless or copper, this usage should be taken.

Hardener Add JA-960 by 10-20%.
Small addition leads to flexible ink film and good adhesion.
Larger addition leads to hard ink film and good alcohol resistance.
Thinner Add E THINNER or NT THINNER(fast drying, standard drying, slow drying)to the mixture by 5-20%. Stir well before use.
Drying 70°C(158°F) 30-120 min(ABS) or 100°C(212°F) 60 min or 120°C(248°F) 12 min.
The relationship between drying time and alcohol resistance
Drying time in 70°C(158°F)
30 min.
60 min.
120 min.
alcohol resistance
(rubbing times with 95% ethanol)
30-60 100-200 200-400
Pot life 6-8 hours at 20°C(68°F). Ink still has its fluidity after pot life. However, it is advised not to use it as properties degrade.
Washing Use our #10 CLEANING THINNER.

HOW TO USE 2

When it is possible to bake at high temperature in the printing on inorganic substrate such as primed metal, aluminum, steel, stainless or copper, this usage should be taken.

Hardener Add JA-1000 by 1-3%.
Thinner Add E THINNER or NT THINNER(fast drying, standard drying, slow drying)to the mixture by 5-20%. Stir well before use.
Drying 100°C(212°F) 60 min or 120°C(248°F) 20 min or 150°C(302°F) 5 min.
Pot life 12 hours at 20°C(68°F). Ink still has its fluidity after pot life. However, it is advised not to use it as properties degrade.
Washing Use our #10 CLEANING THINNER.

PRECAUTIONS

  • The combination of F SERIES and JA-1000 requires heat drying. Good properties can not be obtained at room temperature.
  • JA-960 and JA-1000 gels by humidity even if they are not mixed with ink. Store these Hardeners in a cool and dark place with their lids tightly shut.
  • JA-960 and JA-1000 cannot be used together. If these two Hardener are added together, ink instantly gels.
  • No metal powder can be used to match colors as ink gels.
  • Please refer to MSDS before use.
  • Be sure to do trial print before commercial run to confirm that the product fits the purposes.

COLOR RANGE

07 opaque white, 13 lemon yellow, 14 yellow, 28 orange, 06 bright red, 08 red, 18 geranium, 16 pink, 25 violet, 45 deep blue, 46 blue, 75 green, 90 black, 00 clear

TYPE OF PACKING

Ink : 1kg can.
Hardener : 0.1kg plastic container.
Thinner : 1kg can

Applications Usage

Glass, Ceramics, Metal, ABS, PPS, Thermosetting resin.

MENU